Race Sponsors

Batavia Downs Gaming

Allied Builders
Phillips Oil

L and L Transmission
RonandNewts.png Mazur Auto Repair
Ron and Newts Sales and Service
Here is where we will list any racing equipment that is wanted or is for sale. If you have any cars, parts, trailers, ot tools that you are looking for or want to sell, let us know. Email Burt burt@raceway5.com

FOR SALE - BRP Can-Am Late Model type chassis near Dundee-Woodhull area.
This high quality car was previously owned by the well-known 2-time championship driver Bob Dixon. The car finished 2nd in points at Yates County Speedway in 2014, and has raced successfully at Little Valley, Smethport, and Can-Am. The red powder-coated frame is updated to 2009 CRS-type suspension mounts and has a Camaro clip with CRS tubular spindles. Price does not include engine, ignition, transmission, bellhousing, shifter, or related parts. $7500

Parts include:
  • Winters quick change
  • Winters hubs with angular ball bearings
  • Brakeman scalloped steel rotors
  • 4-piston calipers
  • Fuel cell
  • Genesis gas shocks
Too many parts to list - Email DirtOvalDW@aol.com for more information.

FOR SALE - 88 mustang fox body mini stock complete roller. 5 speed transmission, completely tubed out in very good condition. Just add a motor and go. Also have another gutted 88 fox body mustang ready to be built, (4) 2.3 motors for parts or rebuild, 10 tires and rims with various offsets, numerous frame/body parts, spare rear end housing, a spare 5 speed transmission, and a homemade trailer which pulled the mustang excellent!

Asking $4,500 for everything. Call Doug 585-734-3819. No calls after 9 pm. Calls only please.


FOR SALE - 1992 Honda accord. Front wheel drive. Passed inspection and being raced. Reverse whines but does not affect how it drives at all. Could be a bandit car. Extra parts. Solid car ready to race. I have pics.

$900 or offer - Text 585 813-7370.


FOR SALE OR TRADE - Karcher "steam-jenny" for sale It runs on 220V, and burns diesel fuel. It works great, and you can see it work.

$1000/ B.O. Call Kevin at {716} 759-0436. May trade for large tool box

FOR SALE PRICE REDUCED- 1996 Mitsubishi eclipse. 4 cylinder. Race ready. Bolt seat in.. Put number on side and go! Front wheel drive. Won championship at Blackrock speedway last year! Lots of extras! Spare motor. Both front fenders. Front and back bumper. Pile of tires, Radiator, fan, Transmission, Shifter, Dash. So many other misc parts I don't know what's there. Great bandit car for Batavia or 4 cylinder/mini stock wherever you choose.

Car must go. $1800 or b.o. Call/text 5856945741

FOR SALE - Brodix #HV-301, DIRT logo, regular or sideways mount, 4412 to 4 barrel aluminum adapter---$40
Canton #85-060, Phenolic 4412 to 4 barrel adapter, (new in pkg.)-----$50
Bicknell #BRP374, 1” tall, 4 hole tapered phenolic spacer(new)------$15

Open to offers. All parts used unless otherwise noted. Questions, etc. e-mail: fastfred1a@yahoo.com. Please put "carburetor" in subject line.
4/29/2014 FOR SALE - Larry Shaw semi late model, only 2 races on car. Mono leaf car, camero stub, wide 5 hubs, coleman spindles, afco shocks, 9 inch ford rear with 6-20 gear. Well prepared car. Easy convert to street stock. Complete less motor

$2200.00 OBO. Call jeff @ 716-432-7778
FOR SALE - 2012 Bicknell race car, complete roller. 12 races since new.

For more details, call Pat at 585-738-0094 2/26/2014
FOR SALE: street/super stock parts: *Frames: camaro front clips (4) some complete w arms and spindles, metric front clip (1) very solid, has lower arms.
*Lots of Camaro and metric spindles and control arms, also have longer Ford lowers.
*Rear ends: 9inch housing w axles, 60 inch axle to axle, currently set up for 3 link or torque arm, can strip mounts if desired.
9inch housing, bare, 58 inches bearing to bearing.
GM 10 bolt, 4:10 w/ aftermarket street posi, stock camaro mounts, drum brakes.
GM 10 bolt, 2:73 w locker, camaro rear w clamp on leaf perches, set up for disc brake.
Ford 9inch 57.5 inches axle to axle, complete for metric street stock, car, 3:73,28 spline locker, 5/8 studs, set up for disk, mounts offset 1 inch.
*racing springs, all rears 5 inch, most fronts 5.5 inch, some 5 inch, lots of rates and heights, call/text with what you need.
*Used street stock shocks, stock mount afcos , couple sets
*4 qa1 stock mount rebuildable shocks with revalve/rebuild kit.
*Seats (4), steering wheels (2) switches, recall tachs.

Don't see what you need? Call or text with what your looking for, lots more street stock stuff!

Dirt Modified parts: *Burt transmission, gen 1 includes: bellhousing w rev starter mount, motor plate for 96 bicknell, clutch valve w lever, driveshaft , profile steering box w lines and reservoir. $350-b.o. This is a garage clean out, everything priced to sell, make me an offer, lets make a deal!

Lee 585-478-5959 call or text
WANTED - Looking 4 some 14 x7 steel racing rims for a Mustang. Need 4 please let me know what you have and the price.

Thank you. call 585-409-3886
WANTED - Looking for Lazer front and rear bumpers. New or used in decent shape.

Contact biggdawg1b@cogeco.ca
FOR SALE - 1988 Mustang LX roller, completely gutted, solid frame/body. Includes extra body panels. Also have a full tubed roll cage and all tin to enclose the cockpit, a 15 gallon fuel cell, and choice between 2 seats. Possible extras as well. $1000. Pics available upon request. Contact Doug - 585-734-3819. CALLS ONLY!
FOR SALE - 410 Steel block/aluminum head motor. Carb to pan, 133 laps since fresh. 675 HP on Dyno: sheets included. Available as wet or dry sump system

$8,000 or reasonable offer. Call or text (716) 560-7176
Leave message will call you back
Track Sponsors
Sponsoring the 360 Late Models

Sponsoring the Street Stocks

Sponsoring the Mini Stocks

Sponsoring the Bandits

Ed Arnold Scrap
T-Shirts Etc.
FOAR Score

East Pembroke Fire Dept

Please visit our Contacts page for website feedback and track/competition questions.
Copyright © 2015 :: www.Raceway5.com :: All Rights Reserved :: Visit SeeBark.com today! A SeeBark Media site